TampoBASIC DUO 100 T
- number of colours: 2
- cup size: 100
- plate size: 125 x 250 mm
- Mitsubishi PLC
- Weintek 7” HMI control panel with recipe memory
- the machine is equipped with SICK safety light curtains
- round magnetic ink cup with 100/90/12/DB/1/CB ring
- powder-coated steel body
- base (foot)
…
- pneumatic shuttle table for the workpiece
- compound table under the second plate with adjustment (front back +/- 4 mm; right left +/- 3 mm; angular +/- 3 degrees)
- coordinate table for the workpiece, with precise positioning, no backlash, no need for countering, and tool-less operation
- precise table height adjustment under the workpiece with digital position readout
- tool-less adjustment of the ink cup pressure (clamping magnets plus mechanical pressure force adjustment using springs)
- pneumatic cup drive
- pneumatic pad drive
- coordinate table for pad position adjustment, with tool-less operation
- scales for pad adjustment
- manual actuator speed adjustment
- point (force) of ink supply controlled from the control panel
- point (force) of ink release onto the workpiece controlled from the control panel
- signal column
- manual loading/unloading from the machine front
- three-sided PC safety housing (side walls with limit switches plus bottom cover)
- AIRTAC pneumatic components
- SICK safety relay
- possibility of creating, saving and using recipes
- footswitch
- program functions: double ink pick-up, ink mixing in the cup
- mechanically delayed ink pick-up/release
- electricity demand: 230 V
- compressed air demand: 100 l/min, 6 bar
- machine print cycle time 6 sec
- CE, DTR
- compressed air pre-drying x2
- hydraulic dampers
- technological locker in the machine
